| # Required | Description |
| 1 | 1/4" Drive Ratchet (6" Length) |
| 1 Set | Extension Bar, 1/4" Drive - 2", 4", 10" |
| 1 | 1/4" Drive Sockets, Reg Depth, 12-point, 1/4"-1/2" |
| 1 | Diagonal Cutters |
| 1 | Cotter Key Extractor |
| 1 | Safety Wire Pliers |
| 1 | "Open and Box (Ratcheting) End or Combo Wrenches, 7/32""-7/8"" |
| 4 | Slotted Screwdrivers (one 24" long), 5/32", 3/16", 1/4" |
| 2 | Slotted Stubby Screwdriver, 3/16" & 1/4" |
| 2 | Phillips Screwdrivers (#1 and #2) |
| 2 | Phillips Stubby Screwdriver (#1 and #2) |
| 1 | Metal Ruler (6") |
| 1 | Set Picks |
| 1 | Bright Flashlight (recommend LED) |
| 1 | Inspection Mirror(s) |
| 1 | Telescoping Magnet |
| 1 | Apex Holder 1/4" |
| 1 | Ratcheting Screwdriver |
| 1 | Headlamp |
| 1 | Work Gloves |
| 1 | Lockable Tool Box |
| # Required | Description |
| 2 | Adapters: 3/8" - 1/4", 1/4" - 3/8" |
| 1 | 3/8" Drive Ratchet |
| 1 Set | 3/8" Drive Sockets, Reg Depth, 3/8"-1" |
| 1 Set | 3/8" Drive Sockets, Deep, 3/8"-1" |
| 1 Set | Extension Bar, 3/8" Drive - 4", 6", 10" |
| 1 | Breaker Bar, 3/8" Drive, 18" |
| 1 | Ball Peen Hammer (12-16 oz) |
| 1 | 10" Adjustable Joint Pliers/Channel Locks |
| 1 | Utility Pliers |
| 1 | Duck Bill Pliers |
| 1 | Needle Nose Pliers |
| 1 | Snap Ring Pliers (Inside & Outside) |
| 1 | Adjustable wrench up to 1.5" opening |
| 1 Set | Hex Key Wrenches, 1/16"-5/16", .050" |
| 1 | Scissors |
| 1 | Low-Profile Ratcheting Bit Driver |
| 1 | Tape Measure (25') |
| 1 | Mechanical Fingers |
| 1 | Feeler Gauges |
| 1 | Dead Blow/Rubber Hammer (16 oz or bigger) |
| # Required | Description |
| 1 | Speed Handle 3/8" |
| 1 | Apex Holder 3/8" |
| 1 | Cordless Drill, 12v or Higher |
| 1 | Vise-Grips (LG & SM) |
| 1 | Brass Drift |
| 1 Set | Punch Set (Roll Pins) |
| 1 Set | Set of Angle Wrenches 3/8" to 1-1/4" |
| 1 | Awl |
| 1 | Small File Set |
| 1 | "Open and Box End or Combo Wrenches, 1/4""-7/8""" |
| 1 | Cannon Plug Pliers |